Mega Dock Mega Dock Module Dock

How to Choose When Selecting Floating Docks (pontoons) ?

Floating docks can be manufactured from various different structural materials, and are mainly used as a passage between land and water. In general, the available types of floating docks are: concrete pontoon, aluminum pontoon, floating steel framed docks, rotational HDPE plastic docks and polyethylene pontoons.


So how to find the right floating dock and pontoon?

When choosing a pontoon, first the location of the project must be considered in order to determine the wind and wave loads in that area. Then the suitable pontoon which will best accommodate these loads is selected. Once the type is selected, it will then be manufactured as per the client/project’s requirements and needs.

The use and purpose of each of the above-mentioned models does vary. In this article, we will talk about the features of pontoon models that are generally used in the market.


Floating Aluminum Docks (Pontoons)


floating aluminium pontoon

Aluminum docks are manufactured using water resistant T6 type marine Aluminum. The aluminum frame is generally have decking with wood or wood composite. The floaters used are usually high density polyethylene or fiber concrete coated EPS. The special design of the aluminum pontoon’s profile allows cleats and fenders to be directly attached to the channels located on it. The equipment on the pontoon can be easily changed according to the needs. Floating aluminum pontoons are lightweight and easy to move. They can be shipped to different parts of the world by container or through land.

Floating aluminum docks are suitable for fresh or salt water. They are generally used in calm waters within the port as the wave strength is not high in the closed water area. They are mainly used as piers for marina and boat mooring, and floating walkways.

The Aluminum pontoon is the most expensive among the pontoon types, and that is due to aluminum chassis raw materials requiring decking and craftsmanship which increases the cost. Polyethylene floter is generally used and it is necessary to fill these polyethylene blocks with EPS Styrofoam in order to protect the buoyancy in case of cracks. This model has a commercial life of up to 20-25 years.

To rate aluminium floating dock using a point system (5 being the highest)

Carrying Capacity: Medium 3 Points

Aesthetics: High Standard 5 Points

Practicality: Functional to use 4 Points

Commercial Life: 20 – 25years commercial life 3 points

Cost: High 2 Points

Wave Resistance: Low 2 Points


Floating Concrete Docks (Pontoons)


floating concrete dock

Concrete pontoons are the best solution for high amplitude purposes. The concrete bulk system is fitted around high-density EPS core to forms an economical and durable block in one single piece. All of the iron reinforcement parts used for this single-piece pontoon block are hot-dip galvanized. Sulfate resistant CEM3 class concrete is the preferred type used in the manufacturing process. Using these raw materials enables the concrete and steel parts to become resistant to corrosion.

Floating concrete pontoons generally have the highest load capacity, wave resistance and commercial life among pontoon models, and can be used in many different areas such as marinas, floating platforms, floating house/restaurant/office foundations, military and floating docks.

To rate concrete floating dock using a point system (5 being the highest)

Carrying Capacity: High 5 Points

Aesthetics: Standard 4 Points

Practicality: Functional to use 4 Points

Commercial Life: 40-50 years 5 points

Cost: Reasonable 4 Points

Wave Resistance: High 5 Points


Floating HDPE Plastic Docks (Pontoons)


plastic dock float

This type of pontoon is made by heating the plastic raw material to liquid which moves then into a mold on multi-axis rotation. These products are generally interconnected and are 3mm to 8mm thick. Plastic docks are mainly used as a surface platforms on the water for areas that are periodically and temporary used for swimming purposes.

Plastic pontoons are preferred for easy installation and low cost. However, the commercial life is quite short. Due to the heating and cooling of the plastic under the sun, the material loses its flexible properties and capillary cracks start to form. The water starts to seep into the pontoon modules. That could cause the pontoon to either sink or lose its carrying capacity with the force of the other blocks completely.

To rate HDPE plastic floating dock using a point system (5 being the highest)

Carrying Capacity: Low 2 Points

Aesthetics: Low 2 Points

Usability: functional 3 Points

Commercial Life: 2-3 years 2 points

Cost: Low 5 Points

Wave Resistance: Good 4 Points


Floating Steel Docks (Pontoons)


plastic dock float

Although similar to the floating aluminum pontoons, they are manufactured using structural steel. All steel parts are coated with hot-dip galvanized to protect against corrosion. This type of pontoons are usually used as a better alternative to plastic while maintaining similar costs. The steel frame carcass is highly resistant to flexing, and fiber concrete floats are used underneath it. Natural wood or WPC composite coatings are preferred decking on the steel frame. This pontoon model is suitable for circular and asymmetrical architectural needs, as the steel frame can be curved into different shapes.

Floating steel docks are generally used for touristic swimming facilities, boat berthing, floating platform, finger pontoon, sunbathing island, etc…

They are very comfortable in point loads as the carrying capacity of the pontoon blocks are connected to each other. Steel pontoons work rigidly as a single piece. Steel dock have a commercial life span of 10 to 15 years, but could be slightly higher in freshwater basin.

To rate floating steel dock using a point system (5 being the highest)

Carrying Capacity: Medium 3 Points

Aesthetics: Medium 3 Points

Usefulness: Functional 4 Points

Commercial Life: 10-15 years 3 points

Cost: Low 5 Points

Wave Resistance: Medium 3 Points


About The Author

Hakan Hakan